Popi/NewAPIWG is now the primary gateway, so the UI and request paths need to avoid legacy provider assumptions while keeping local reference media usable for upstream calls. This change aligns model defaults, point display, inline node controls, and temporary reference image handling around that gateway boundary.
Constraint: Upstream providers cannot fetch localhost reference URLs, but large base64 payloads previously caused request/body reliability issues.
Constraint: Seedance point estimates depend on authenticated NewAPIWG /api/points/estimate responses rather than static catalog prices.
Rejected: Send all reference images directly as large data URLs | would reintroduce oversized JSON/request failures.
Rejected: Restore legacy per-provider key controls by default | current product direction is a single Popi/NewAPI gateway.
Confidence: high
Scope-risk: moderate
Directive: Do not pass /api/images localhost URLs to upstream generation APIs; resolve them server-side or fail before the upstream call.
Tested: npm run test:run -- src/app/api/generate/providers/__tests__/newapiwg.test.ts src/app/api/points/estimate/__tests__/route.test.ts src/lib/images/store.test.ts src/components/__tests__/GenerationComposer.test.tsx src/components/__tests__/ImageInputNode.test.tsx src/components/__tests__/PromptNode.test.tsx src/components/__tests__/ProjectSetupModal.test.tsx src/store/execution/__tests__/generateVideoExecutor.test.ts src/store/execution/__tests__/nanoBananaExecutor.test.ts src/store/utils/__tests__/nodeDefaults.test.ts
Tested: npm run build
Tested: git diff --check
Not-tested: npm run lint fails because next lint is parsed as a missing /lint project directory under Next 16.
Multi-image NewAPIWG generations were sending base64 reference images
inside the /api/generate JSON body. Two ordinary canvas references can
push that payload near the dev/server body boundary, leaving the route
to parse an incomplete JSON string and surface a raw syntax error.
Move large NewAPIWG references through the existing in-memory image
serving path: the browser uploads large data URLs as multipart image
files, sends short /api/images/{id} URLs in the generation request, and
the route resolves those temporary URLs back to server-local image data
before calling providers. The route also turns malformed/truncated JSON
into a readable validation error.
Constraint: Keep provider payload semantics unchanged after /api/generate receives the request
Constraint: Do not rely on request origin matching because Next dev can report 0.0.0.0 while the browser uses localhost
Rejected: Increase body size limits only | still sends multi-MB JSON and does not protect hosted/proxied environments
Rejected: Compress reference images client-side | changes model input fidelity and still leaves large JSON possible
Confidence: high
Scope-risk: moderate
Directive: Do not forward /api/images/{id} temporary URLs to external providers; resolve them server-side first
Tested: npm run test:run -- src/store/execution/__tests__/nanoBananaExecutor.test.ts src/app/api/generate/__tests__/route.test.ts
Tested: npm run build
Not-tested: Live NewAPIWG generation with the user's exact two images
The default Popi Models image route can return transient upstream overloads for apiyi_nano_banana_2 even when the gateway configuration is valid. The executor now uses gpt-image-2-all as an implicit same-gateway fallback only for overload-shaped errors, while preserving explicit fallback behavior and surfacing non-overload errors unchanged.
Constraint: The gateway can intermittently return system_disk_overloaded for the default image model
Rejected: Change the default model globally | would alter every new image node instead of only recovering transient failures
Rejected: Fallback on every error | would hide prompt, safety, or request-shape problems
Confidence: high
Scope-risk: moderate
Directive: Keep implicit fallback predicates narrow so user-actionable errors remain visible
Tested: npm run test:run
Tested: npm run build
The browser path helper briefly acted as a type predicate, which made existing non-browser path branches narrow to never under the production build. The callers now guard nullable paths explicitly while the helper stays a plain boolean check.
Constraint: ProjectSetupModal depends on checking both browserfs paths and regular filesystem strings in the same helper flow.
Confidence: high
Scope-risk: narrow
Tested: npm test -- --run src/components/__tests__/GenerateImageNode.test.tsx src/store/execution/__tests__/nanoBananaExecutor.test.ts src/components/__tests__/GenerationComposer.test.tsx
Tested: npx tsc --noEmit --pretty false filtered to touched browser path files
Not-tested: Full tsc remains blocked by existing test typing errors outside this change scope
Browser-local projects were deriving a null generations path, so carousel entries that only retained an image id could not resolve media during previous/next navigation. Generated images are now written into the browser-selected generations folder, project metadata keeps that browserfs generations path, and the image node can read browserfs generation files directly before falling back to the server load endpoint.
Constraint: Browser-selected folders cannot be read through server API routes.
Rejected: Keep relying on inline image history only | saved or migrated workflows can contain id-only history entries.
Confidence: high
Scope-risk: moderate
Directive: Browser-local media paths must stay on the File System Access API path, not server /api/load-generation.
Tested: npm test -- --run src/components/__tests__/GenerateImageNode.test.tsx src/store/execution/__tests__/nanoBananaExecutor.test.ts src/components/__tests__/GenerationComposer.test.tsx
Tested: npx tsc --noEmit --pretty false filtered to touched files
Not-tested: Full tsc remains blocked by existing test typing errors outside this change scope
Browser-local projects cannot load node carousel history through the server-side generations API. Each new image history entry now keeps the generated data URL for immediate in-session switching, while server-backed projects can still fall back to loading by generation id. Browser-local generation paths also skip /api/save-generation because that endpoint can only write server filesystem paths.
Constraint: Project storage can be browser-local and therefore unavailable to server filesystem APIs.
Rejected: Force carousel switching through /api/load-generation | browserfs paths cannot be resolved by the server and cause switching failures.
Confidence: high
Scope-risk: narrow
Directive: Keep carousel history able to switch without server round-trips when images were generated in the current session.
Tested: npm test -- --run src/components/__tests__/GenerateImageNode.test.tsx src/store/execution/__tests__/nanoBananaExecutor.test.ts
Tested: npx tsc --noEmit --pretty false filtered to changed production files
NewApiWG image and video models need to work against the PopiArt test gateway, with generated remote media visible in the canvas and UI text localized for Chinese users. This wires the gateway-specific image/video paths, model fallback display, remote media proxying, and related i18n cleanup into one releaseable change.
Constraint: Test gateway exposes image and video models through mixed OpenAI-compatible and Gemini-native response shapes
Constraint: Browser video playback can fail when loading signed third-party media URLs directly
Rejected: Keep remote video URLs as direct <video> sources | CORS and range handling made successful generations appear unloaded
Confidence: high
Scope-risk: moderate
Directive: Do not remove the media proxy without validating remote video playback, trimming, and stitching against signed CDN URLs
Tested: npm run build
Tested: npx vitest run src/components/__tests__/OutputNode.test.tsx src/components/__tests__/GenerateVideoNode.test.tsx src/components/__tests__/VideoStitchNode.test.tsx
Tested: npx vitest run src/components/__tests__/WorkflowCanvas.test.tsx src/store/execution/__tests__/generateVideoExecutor.test.ts
Tested: npx vitest run src/app/api/generate/providers/__tests__/newapiwg.test.ts
Not-tested: Live browser replay after pushing to remote deployment
Resolve conflicts in 4 executor files by combining develop's
runWithFallback structure with feature branch's client-side polling.
Both capabilities are now integrated: executors use runWithFallback
for model redundancy, and pollGenerateTask for long-running Kie tasks.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
All executors that call /api/generate now check for the polling flag
and enter the pollGenerateTask loop for long-running Kie tasks.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Gemini image models (nano-banana, nano-banana-pro, nano-banana-2) were
not showing parameters when set as fallback models. Three root causes:
1. Schema API returned empty for Gemini image models — added
getGeminiImageSchema() with aspect ratio, resolution, and search
grounding parameters per model
2. ModelParameters had an early-return guard skipping all non-Veo Gemini
models — removed to make the component provider-agnostic
3. nanoBananaExecutor ignored parametersOverride for Gemini-specific
fields (aspectRatio, resolution, useGoogleSearch, useImageSearch) —
now reads from override when available
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Updates runOnce in all four generation executors to accept an optional
parametersOverride argument. When running the fallback model, the
executor uses fallbackParameters from node data instead of the primary
model's parameters.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Introduces a shared runWithFallback helper that wraps primary model
attempts with an optional fallback. On primary failure (non-abort),
the fallback runs once and metadata is stamped on the node so the UI
can render a "Fallback used" badge. Fallback is skipped when primary
and fallback resolve to the same provider/model to avoid double-billing.
Wired through all generation executors (nanoBanana, generateVideo,
generateAudio, generate3d, llmGenerate) with accompanying tests.
JSON-compatible with Node Banana Pro: fallbackModel and __-prefixed
metadata fields match NBP's shape for clean config round-trips.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Nano Banana 2 (gemini-3.1-flash-image) supports a new searchTypes API
that allows enabling web search and image search independently. This adds
a useImageSearch toggle visible only for Nano Banana 2, while keeping the
existing Google Search toggle using the legacy format for Nano Banana Pro.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix nanoBananaExecutor narrowing issue where promptText was narrowed
to `never` after type guard, and fix addEdge type mismatch where
Edge<T> data can be undefined but addEdge expects it defined.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Extract shared video-probing module (constants, helpers, probeVideoMetadata)
from useTrimVideo and useStitchVideos into src/lib/video-probing.ts
- Fix audio interleaving in useTrimVideo to feed audio before video frames,
matching useStitchVideos fix for Discord playback compatibility
- Fix blob URL leaks in VideoTrimNode and videoProcessingExecutors
- Fix nanoBananaExecutor: null coercion for non-string prompts, redact PII
in console.warn, remove duplicate dynamicInputs.prompt
- Fix generateAudioExecutor double updateNodeData on error paths
- Fix fal.ts media fetch ordering for 3D model detection
- Fix kie.ts and replicate.ts content-type detection for audio models
- Fix WorkflowCanvas connection drop menu wiring for generateAudio nodes
- Fix open-file route Windows path quoting
- Add path traversal protection to workflow-images route
- Add AudioInputNode onerror handler for metadata loading failures
- Fix useAudioPlayback uncaught play() promise rejection
- Add generateAudio case to regenerateNode in workflowStore
- Update placeholder Discord links to real invite URL
- Extract ProviderBadge into shared component in Generate3DNode
- Fix VideoTrimNode duration detection with proper cleanup and cancellation
- Fix GenerateAudioNode test fetch mock cleanup
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add defensive type coercion guard for promptText (handles non-string at runtime)
- Sanitize dynamicInputs.prompt to string before including in request payload
- Add final assertion guard before fetch to provide clear error if prompt is not a string
- Ensure text values in connectedInputs are always strings via String() coercion
* refactor: extract schema utilities from generate route
Extract INPUT_PATTERNS, InputMapping, ParameterTypeInfo, getParameterTypesFromSchema,
coerceParameterTypes, and getInputMappingFromSchema into schemaUtils.ts with 23 new tests.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: extract Gemini provider from generate route
Move MODEL_MAP and generateWithGemini() into providers/gemini.ts.
Remove unused imports (GoogleGenAI, uploadImageForUrl, shouldUseImageUrl,
deleteImages, ProviderModel) from route.ts.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: extract Replicate provider from generate route
Move generateWithReplicate() into providers/replicate.ts.
It imports schema utilities from schemaUtils.ts.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: extract fal.ai, Kie.ai, WaveSpeed providers from generate route
Move generateWithFalQueue, generateWithKie, generateWithWaveSpeed and all
their helpers into providers/fal.ts, providers/kie.ts, providers/wavespeed.ts.
Add barrel export at providers/index.ts.
route.ts reduced from 2,838 to 518 lines (POST handler + routing only).
Re-export clearFalInputMappingCache from route.ts for test backward compat.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: extract API header builder from workflow store
Replace 6 duplicated header-building if/else chains (across executeWorkflow
and regenerateNode) with buildGenerateHeaders() and buildLlmHeaders() utility
functions. Add 13 new tests.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: extract execution utilities from workflow store
Move groupNodesByLevel, chunk, revokeBlobUrl, clearNodeImageRefs,
and concurrency settings into executionUtils.ts with 21 new tests.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: extract getConnectedInputs and validateWorkflow as pure functions
Move getConnectedInputs (136 lines) and validateWorkflow (59 lines) into
connectedInputs.ts as pure functions taking (nodeId, nodes, edges).
Store methods become thin wrappers. Add 22 new tests.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: define node executor interface and context types
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: extract simple node executors
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: unify nanoBanana execution into shared executor
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: unify generateVideo execution into shared executor
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: unify llmGenerate execution into shared executor
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: unify splitGrid execution into shared executor
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: unify videoStitch and easeCurve executors
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: replace switch/if-else with node executor registry
Wire extracted executors into workflowStore, replacing the ~1000-line
switch statement in executeWorkflow and ~750-line if-else chain in
regenerateNode with executor registry calls. Store reduced from 3,402
to 1,782 lines.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: final cleanup of workflowStore module structure
Remove dead trackSaveGeneration function (no longer called after executor
extraction) and unused type imports. Store: 3,838 -> 1,721 lines (55% reduction).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: video regeneration spinner stuck + cancel error message
Fix video element not reloading on regeneration by adding key prop tied
to video history ID. Fix cancel showing timeout message by passing
"user-cancelled" reason through AbortController and checking it in all
three executor catch blocks.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: address PR #59 review — 18 bug, security, and robustness fixes
Providers:
- fal: don't cache failed schema fetches, remove duplicate param spread, SSRF-validate mediaUrl
- gemini: remove redundant header overrides, fix nano-banana model ID
- kie: module-level MAX_MEDIA_SIZE, post-download size check, upload size guard
- replicate: remove duplicate param spread, validate modelId format
- wavespeed: post-download size check, NaN-safe parseInt, prevent prompt overwrite
Executors:
- generateVideo: validate stored fallback inputs same as regular path
- nanoBanana: cap imageHistory at 50 entries
- splitGrid: handle img.onerror with warning + null data
- videoProcessing: add FileReader onerror/onabort handlers
Utilities:
- connectedInputs: use ?? instead of || for outputText/template
- executionUtils: guard orphan children in topological sort, validate chunk() size
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: additional PR review fixes — SSRF, data semantics, sync tracking, error propagation
Providers:
- replicate: add SSRF validation on mediaUrl before fetch
- fal/kie/replicate/wavespeed: large-video returns data="" with url set
instead of putting raw URL in data field (violates GenerationOutput.data semantic)
- kie: remove stale WaveSpeed JSDoc block from kie provider file
- route.ts: update all output handling to support data="" + url for large videos
Executors:
- generateVideoExecutor/nanoBananaExecutor: track save-generation fetch in
pendingImageSyncs via new trackSaveGeneration context method so auto-save
waits for server ID resolution
- videoProcessingExecutors: throw errors instead of returning in validation
branches (encoderSupported, insufficient videos, no video connected) so
Promise.allSettled sees rejections
- types.ts: add trackSaveGeneration to NodeExecutionContext interface
- workflowStore: wire trackSaveGeneration into both execution context sites
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: content-type fallback, replicate polling/validation, atomic gallery append
- fal.ts: Use model capabilities to determine fallback content-type
(video/mp4 vs image/png) instead of defaulting to video for all models
- replicate.ts: Increase polling timeout to 10 min for video models;
filter output array to valid strings before URL validation
- nanoBananaExecutor.ts: Replace read-modify-write on outputGallery with
atomic appendOutputGalleryImage using Zustand set() callback
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: extract _buildExecutionContext to deduplicate NodeExecutionContext construction
Replace identical inline context creation in executeWorkflow and regenerateNode
with a single shared helper, ensuring consistent behavior across both code paths.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add keyboard shortcuts help dialog
- New KeyboardShortcutsDialog component showing all available shortcuts
- Accessible via ? button in header and ? key on canvas
- Groups shortcuts by category: General, Add Nodes, Layout, Canvas
- Auto-detects Mac vs Windows/Linux for modifier key display
- Follows existing modal patterns (Escape to close, backdrop click)
* feat: add keyboard shortcuts dialog and 3D GLB viewer node
- Keyboard shortcuts: press ? or click keyboard icon to view all shortcuts
- 3D GLB viewer: upload .GLB files, orbit/rotate, capture as image output
- Fix: restore trailing newline in gemini.ts provider
* fix: make Prompt node editable when connected to LLM node
When a Prompt node receives text from an LLM Generate node, the text
should be editable by the user. Previously, the textarea was marked as
readOnly when there was an incoming text connection, preventing edits
in both the main view and the expanded modal.
Changes:
- Track last received LLM output to detect when it changes
- Only update prompt when LLM node runs again (output changes)
- Allow user edits in between LLM runs
- Remove readOnly restriction on textarea
- Update placeholder text to indicate editability
This allows users to edit the LLM-generated text, which will be
replaced only when the LLM node runs again, not on every render.
Fixes#1470061054246518927
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* fix: PR review fixes — lazy-load three.js, blob URL cleanup, missing integrations
- Remove unused `useLoader` import from GLBViewerNode
- Add useEffect cleanup to revoke blob URL on node unmount (memory leak)
- Replace alert() with useToast for file validation errors
- Lazy-load GLBViewerNode via next/dynamic to avoid bundling three.js for all users
- Add glbViewer to ConnectionDropMenu IMAGE_SOURCE_OPTIONS
- Add glbViewer case to quickstart validation createDefaultNodeData (build fix)
- Restore trailing newline in gemini.ts
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: address PR #64 review — blob leak, error handling, tests, docs
Move @types/three to devDependencies, fix blob URL cleanup to track
changes (not just unmount), add try/catch to capture and scene disposal,
remove GLBViewerNode from barrel export to preserve lazy-loading, fix
JSDoc, update CLAUDE.md with glbViewer node and ? shortcut, add
connectedInputs and nodeDefaults tests for glbViewer.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: improve GLB viewer — fix viewport sizing, add spot light, handle labels, scroll isolation
- Fix 3D viewport not filling node by adding resize={{ offsetSize: true }} for correct measurement in CSS-transformed React Flow nodes
- Replace grid/axis indicators with spot light for cleaner scene
- Add labeled input (3D) and output (Image) handles matching generate node style
- Add native wheel event listener to prevent graph zoom/pan while scrolling to zoom 3D model
- Remove redundant CSS workarounds (absolute positioning style, extra relative wrapper)
- Add edge-to-edge viewport via contentClassName (removes default padding when GLB loaded)
- Overlay controls bar on viewport with gradient background
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add customizable canvas navigation settings (#65)
* feat: add customizable canvas navigation settings
Add a new settings modal that allows users to configure canvas navigation preferences:
- Pan Mode: Space + Drag (default), Middle Mouse, or Always On (ComfyUI-style)
- Zoom Mode: Alt + Scroll (default), Ctrl + Scroll, or Scroll (no modifier)
- Selection Mode: Click (default) or Alt + Drag
Features:
- Settings persist in localStorage
- New canvas settings button in header (monitor icon)
- Modal UI with radio button groups for each setting
- React Flow props dynamically configured based on user preferences
- Updated wheel event handler to respect zoom mode settings
This addresses user requests for ComfyUI/TouchDesigner-style navigation where
panning and zooming work without holding modifier keys.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* fix: PR #65 review — altDrag selection bug, icon, dedup, tests
- Fix altDrag selection mode: use selectionKeyCode="Alt" instead of
selectionOnDrag=true which made drag-select work without any key
- Replace misleading video camera icon with arrows-pointing-out for
canvas navigation settings button
- Extract duplicated settings buttons JSX into settingsButtons variable
shared by both configured/unconfigured project branches
- Add defensive useEffect to sync CanvasSettingsModal state on open
- Add missing semicolon in types/index.ts canvas re-export
- Add localStorage tests for getCanvasNavigationSettings and
saveCanvasNavigationSettings
- Add integration tests for updateCanvasNavigationSettings
- Fix WorkflowCanvas test mocks to include canvasNavigationSettings
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: move canvas navigation settings into Project Settings modal
Consolidate canvas settings from standalone CanvasSettingsModal into a
new "Canvas" tab in ProjectSetupModal. Remove "like ComfyUI" text, add
Shift+Drag selection mode, and fix save button to bottom of dialog.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: remove double semicolon in types/index.ts
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
* feat: add executeSelectedNodes with topo sort, abort, and downstream propagation
Implements the "Run selected nodes" feature (PR #61) with fixes for all 8
review issues: topological ordering via groupNodesByLevel, AbortController
cancellation, glbViewer case coverage, AbortError filtering, downstream
consumer propagation with dedup guard, and dynamic button label. Also
extracts saveLogSession helper to replace 4 inline duplicates across
executeWorkflow and regenerateNode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: 3D model saving, error handling, and node improvements
- Save 3D models (GLB) to generations folder via save-generation API
- Add try-catch to WaveSpeed polling loop to handle network errors
- Skip downloading 3D model bodies in WaveSpeed (return URL directly)
- Fix schemaUtils false-positive matching for short property names
- Stabilize GenerateImageNode output handle ID (always "image")
- Fix GLBViewerNode: block-body forEach lint, store-based resize
- Use useRef instead of useState for PromptNode lastReceivedText
- Add executeGlbViewer tests and abort signal support
- Fix annotation stale pass-through when upstream image changes
- Skip error status on AbortError in all executor catch blocks
- Revoke glbUrl blob URLs in clearNodeImageRefs
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* docs: require per-task commits in multi-task plans
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add Generate3DNodeData type definitions
Add "generate3d" to NodeType union, Generate3DNodeData interface,
Generate3DNodeDefaults, and update NodeDefaultsConfig.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add generate3d node defaults and dimensions
Add default dimensions (300x300) and createDefaultNodeData case for
the generate3d node type.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: create generate3d executor
Extracted from nanoBananaExecutor's 3D handling code. Handles 3D model
generation via /api/generate with mediaType: "3d", cost tracking, and
auto-save to generations folder.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: create Generate3DNode component
Dedicated node component for 3D model generation, modeled after
GenerateVideoNode. Features: dynamic input handles from schema,
3D output handle, model browsing, parameter controls, status overlays.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: register generate3d node type across codebase
Register in execution index, workflowStore (executeWorkflow,
regenerateNode, executeSelectedNodes), nodes index, WorkflowCanvas
(nodeTypes, getNodeHandles, minimap color, findCompatibleHandle).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add generate3d source output in connectedInputs
Add generate3d case in getSourceOutput() to return 3D URL data,
enabling downstream nodes to receive 3D model output.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: route 3D models to generate3d in ModelSearchDialog
Add "3d" capability filter, update handleSelectModel to detect 3D
models and create generate3d nodes with capabilities passed through,
update recent models filter for 3D.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: update ConnectionDropMenu 3D source to use generate3d
Change THREE_D_SOURCE_OPTIONS from nanoBanana to generate3d with
cube icon and "Generate 3D" label.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: remove 3D code from GenerateImageNode and nanoBananaExecutor
- Remove text-to-3d/image-to-3d from IMAGE_CAPABILITIES
- Remove is3D memo and conditional handle/label styling
- Remove 3D output preview block
- Remove output3dUrl from model change handlers
- Remove is3DModel detection and mediaType from nanoBanana executor
- Remove 3D response handling from nanoBanana executor
- Remove output3dUrl from NanoBananaNodeData and its defaults
- Remove 3D fallback from nanoBanana in connectedInputs
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: update tests and remaining registrations for generate3d
- Add Generate3DNode.test.tsx with render, handle, and output tests
- Add 3D handle tests to ConnectionDropMenu.test.tsx
- Add 3D model routing test to ModelSearchDialog.test.tsx
- Update ModelSearchDialog test expectations for capabilities passthrough
- Register generate3d in executeNode.ts dispatcher
- Add generate3d to WorkflowCanvas keyboard shortcut dimensions
- Add generate3d to quickstart validation (VALID_NODE_TYPES, dimensions, defaults)
- Add generate3d to chat tools (VALID_NODE_TYPES, description)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: unwrap array inputs for non-array API parameters
When multiple images are connected to a generation node, dynamicInputs
aggregates them into arrays. Providers wrapped single values into arrays
for array-typed params, but never unwrapped arrays for string-typed params,
causing API failures (e.g. fal's image_url receiving an array instead of
a string). Add symmetric unwrap logic across all four providers.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: move 3D from floating action bar to Generate submenu
Replace top-level glbViewer button with generate3d option in the
Generate combo dropdown, between Video and Text (LLM).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: hide CostIndicator when non-Gemini providers are in workflow
The pricing calculator only has reliable data for Gemini models. When
non-Gemini providers (fal, replicate, kie, wavespeed) are used, the
displayed cost is incomplete/misleading. Add hasNonGeminiProviders()
utility and use it to hide the CostIndicator entirely in that case.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add 3D capability badges to ModelSearchDialog
Add text-to-3d and image-to-3d capability badge styling.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add play/run icon to LLM Generate node title bar
Wire onRun and isExecuting props to BaseNode, matching the pattern
used in GenerateImageNode and GenerateVideoNode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: clear imageRef when user provides new image to prevent stale saves
When a user pastes/uploads a new image into a node that already has a
saved imageRef, the externalization logic incorrectly assumes the base64
is just hydrated data and discards it. Clear *Ref fields whenever new
image data is set so the save logic correctly persists the new image.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: guard against undefined from empty array unwrap in fal provider
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add 3x2 grid layout option to split grid node
Change layout selector from count-based to layout-based, allowing both
2x3 and 3x2 (portrait) layouts that produce 6 images. Now shows 7
layout options (2x2, 1x5, 2x3, 3x2, 2x4, 3x3, 2x5) with RxC labels.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: charlieshoelace <charlieshoelace@gmail.com>
- Remove text-to-3d/image-to-3d from IMAGE_CAPABILITIES
- Remove is3D memo and conditional handle/label styling
- Remove 3D output preview block
- Remove output3dUrl from model change handlers
- Remove is3DModel detection and mediaType from nanoBanana executor
- Remove 3D response handling from nanoBanana executor
- Remove output3dUrl from NanoBananaNodeData and its defaults
- Remove 3D fallback from nanoBanana in connectedInputs
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Save 3D models (GLB) to generations folder via save-generation API
- Add try-catch to WaveSpeed polling loop to handle network errors
- Skip downloading 3D model bodies in WaveSpeed (return URL directly)
- Fix schemaUtils false-positive matching for short property names
- Stabilize GenerateImageNode output handle ID (always "image")
- Fix GLBViewerNode: block-body forEach lint, store-based resize
- Use useRef instead of useState for PromptNode lastReceivedText
- Add executeGlbViewer tests and abort signal support
- Fix annotation stale pass-through when upstream image changes
- Skip error status on AbortError in all executor catch blocks
- Revoke glbUrl blob URLs in clearNodeImageRefs
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix 3D viewport not filling node by adding resize={{ offsetSize: true }} for correct measurement in CSS-transformed React Flow nodes
- Replace grid/axis indicators with spot light for cleaner scene
- Add labeled input (3D) and output (Image) handles matching generate node style
- Add native wheel event listener to prevent graph zoom/pan while scrolling to zoom 3D model
- Remove redundant CSS workarounds (absolute positioning style, extra relative wrapper)
- Add edge-to-edge viewport via contentClassName (removes default padding when GLB loaded)
- Overlay controls bar on viewport with gradient background
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- fal.ts: Use model capabilities to determine fallback content-type
(video/mp4 vs image/png) instead of defaulting to video for all models
- replicate.ts: Increase polling timeout to 10 min for video models;
filter output array to valid strings before URL validation
- nanoBananaExecutor.ts: Replace read-modify-write on outputGallery with
atomic appendOutputGalleryImage using Zustand set() callback
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Providers:
- replicate: add SSRF validation on mediaUrl before fetch
- fal/kie/replicate/wavespeed: large-video returns data="" with url set
instead of putting raw URL in data field (violates GenerationOutput.data semantic)
- kie: remove stale WaveSpeed JSDoc block from kie provider file
- route.ts: update all output handling to support data="" + url for large videos
Executors:
- generateVideoExecutor/nanoBananaExecutor: track save-generation fetch in
pendingImageSyncs via new trackSaveGeneration context method so auto-save
waits for server ID resolution
- videoProcessingExecutors: throw errors instead of returning in validation
branches (encoderSupported, insufficient videos, no video connected) so
Promise.allSettled sees rejections
- types.ts: add trackSaveGeneration to NodeExecutionContext interface
- workflowStore: wire trackSaveGeneration into both execution context sites
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix video element not reloading on regeneration by adding key prop tied
to video history ID. Fix cancel showing timeout message by passing
"user-cancelled" reason through AbortController and checking it in all
three executor catch blocks.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Wire extracted executors into workflowStore, replacing the ~1000-line
switch statement in executeWorkflow and ~750-line if-else chain in
regenerateNode with executor registry calls. Store reduced from 3,402
to 1,782 lines.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
huangmin
TianYun
宋向航